Skip to content
Maintenance

Hot Water Smells Like Rotten Eggs? Causes and Fixes

That sulfur smell when you turn on the hot tap is unpleasant but usually fixable. Here's what causes it and how to make it go away for good.

By Covina Water Heater Pros · · 2 min read

Hot Water Smells Like Rotten Eggs? Causes and Fixes

Quick answer

A rotten-egg smell that only comes from the hot water is usually caused by sulfate-reducing bacteria in the tank reacting with a magnesium anode rod, producing hydrogen sulfide gas. Flushing and disinfecting the tank, lowering the anode reactivity with an aluminum-zinc or powered anode rod, and keeping the temperature high enough to discourage bacteria usually solve it.

Need it fixed today? Call (626) ***-****

Hot Side Only or Both Sides?

Run the cold tap first. If the cold water smells too, the issue is in your water supply or drains, not the heater. If only the hot water smells, the water heater is the source.

Safety first: A rotten-egg smell in the air near a gas water heater is different. That can be a natural gas leak. Leave the house and call SoCalGas. See what to do if you smell gas.

Why It Happens

Every tank water heater has an anode rod, a metal rod that slowly corrodes so your tank doesn't. Most come with magnesium rods. Harmless bacteria that live in some water supplies feed on the reaction between the magnesium and the water and give off hydrogen sulfide, the gas that smells like eggs.

The problem gets worse when the heater sits unused (vacation homes, rental vacancies), when the temperature is set low, or after a water softener is added, since softened water makes magnesium rods react faster.

Not sure what's wrong with your water heater?

Talk to a local Covina technician now. Honest advice, upfront pricing.

(626) ***-****

How to Fix the Smell

  1. Flush the tank to remove sediment where bacteria live. See how to flush a water heater.
  2. Disinfect the tank with a hydrogen peroxide treatment. This is best done by a pro since it involves removing the anode rod.
  3. Swap the anode rod for an aluminum-zinc rod or a powered (electronic) anode, which stops the reaction for good.
  4. Keep the thermostat around 120–130°F. Very low settings encourage bacteria growth.

Pro tip: Never remove the anode rod without replacing it. Without one, the tank will corrode and fail quickly, and it can void your warranty.

When the Smell Comes Back

If the smell returns within weeks, the anode swap is the long-term fix. A powered anode rod uses a tiny electrical current instead of a sacrificial metal, so there's nothing for the bacteria to react with. It's also a good option for homes with softened water. Learn more in our anode rod guide.

This article is general information for Covina-area homeowners. Gas, venting and electrical work should be done by a licensed professional. For help with your specific water heater, call (626) ***-****.

Frequently Asked Questions

The bacteria responsible are generally not a health risk, but the smell is unpleasant and the hydrogen sulfide can tarnish fixtures. It's worth fixing.
Not necessarily. A new tank with the same magnesium anode can develop the same smell. Changing the anode type is the real fix.
A temporary boost to 140°F can help, but it raises scald risk. Always lower it again and use anti-scald precautions.

Stinky Hot Water?

We replace anode rods and sanitize tanks across Covina.

Call (626) ***-****
Call Now Free Quote