Skip to content
Tankless

How to Descale a Tankless Water Heater (Step by Step)

Descaling is the single most important maintenance task for a tankless water heater in hard-water country. Here's how it's done.

By Covina Water Heater Pros · · 2 min read

How to Descale a Tankless Water Heater (Step by Step)

Quick answer

To descale a tankless water heater, shut off power and gas, close the isolation valves, connect a small pump and hoses to the service ports, and circulate a descaling solution or white vinegar through the heat exchanger for about 45–60 minutes. Then flush with clean water, clean the inlet filter and restore service. In Covina, do this about once a year.

Need it fixed today? Call (626) ***-****

Why Descaling Matters

Inside a tankless heater, water flows through narrow passages in the heat exchanger. Hard water leaves calcium scale on those surfaces. Scale insulates the metal, so the burner overheats while the water heats poorly. You'll notice lower flow, fluctuating temperature, and eventually error codes.

What You Need

  • Isolation (service) valves on the hot and cold lines
  • A small submersible pump
  • Two washing machine-style hoses
  • A 5-gallon bucket
  • About 2–4 gallons of descaling solution or undiluted white vinegar
  • Your owner's manual

If your unit doesn't have isolation valves, you'll need a plumber to add them first. It's a one-time upgrade that makes every future service quicker.

Not sure what's wrong with your water heater?

Talk to a local Covina technician now. Honest advice, upfront pricing.

(626) ***-****

Step by Step

  1. Turn off power to the unit and close the gas valve.
  2. Close the main hot and cold isolation valves.
  3. Connect a hose from the pump outlet to the cold service port, and a second hose from the hot service port back into the bucket.
  4. Put the pump in the bucket with the descaling solution.
  5. Open both service ports and run the pump for 45–60 minutes.
  6. Turn off the pump, empty the bucket and flush with clean water for a few minutes.
  7. Close the service ports, remove hoses, and clean the cold-water inlet filter screen.
  8. Open the main isolation valves, restore gas and power, and run a hot tap to purge air.

Safety first: Follow your manufacturer's instructions. Some brands specify particular descaling products, and gas components should only be serviced by a qualified technician.

How Often in Covina?

Once a year is a good baseline for most San Gabriel Valley homes. Large households or homes with very hard water may need it every 6–9 months. A water softener or scale-prevention filter can stretch that interval. Read about water softeners and water heaters.

Prefer not to do it yourself? Our annual tankless service includes descaling, filter cleaning, combustion check and a full inspection. See tankless services.

This article is general information for Covina-area homeowners. Gas, venting and electrical work should be done by a licensed professional. For help with your specific water heater, call (626) ***-****.

Frequently Asked Questions

Many manufacturers allow white vinegar, but some recommend a specific descaling solution. Check your owner's manual.
Scale buildup will reduce efficiency, cause error codes and overheating, and can eventually damage the heat exchanger, which may not be covered under warranty.
About 1–2 hours including setup, circulation and flushing.

Want Us to Descale It?

Annual tankless service for Covina homes, done right.

Call (626) ***-****
Call Now Free Quote